Please read our Legal Disclaimer before executing any steps on this article.
Interval and Purposes
Carry out the maintenance and inspection jobs listed in the table below.
Caution
Maintenance and inspection must be carried out by a trained worker who possesses the ability to perform these tasks safely.
Before performing maintenance and inspection jobs, read the SAFETY PRECAUTIONS, "Precautions while Robot is Running 1" and "Others".
No. | Interval | Purpose |
| 1 | Daily | To use your robot safely. |
| 2 | Quarterly | To maintain the precision of the robot and to prevent failures caused by overheat of the robot controller |
| 3 | Semiyearly | To check the rotary sections and slideways of the robot and its controller for wear, preventing seizure, breakage, and other serious failures that could result from wear. |
| 4 | Biennial | To retain the position data stored in the electronic absolute encoder built in the robot unit. Replace backup batteries as specified in every two years. |
Owner's Manual Reference
https://www.fa-manuals.denso-wave.com/en/usermanuals/006535/
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article