What happens to the arm odometer after an arm swap out with an RC7M?

Please read our Legal Disclaimer before executing any steps on this article. 

The arm odometer doesn't reset automatically after you swap a new arm into an existing controller.  If the previous odometer data is needed, then the project backup will need to be loaded into the controller.

To access the RC7M odometer: 

            Set >> Maint >> Total h.

Step 1 On the top screen of the teach pendant, press [F6 Set]. The Settings (Main) window appears.
Step 2 Press [F6 Maint.] in the Settings (Main) window. The Maintenance menu appears.
Step 3 Press [F1 Total h.] in the Maintenance menu.

Related Links: 

• WinCAPS III Creating RC7/8 Backup